The hardmetal saw blade consists of a carrying belt made of special steel into which the teeth are machined. Onto the teeth, specially grounded hardmetal plates are welded. Hardmetal imbedded saw blade suitable for cutting of surface-quenched materials, chrome-plated parts, forged components and materials with extreme toughness and hardness up to 62 HRC.
Maxtech 620 / variable and constant toothing
Characteristics:
special process of carbide welding, precisely ground tooth tips ● thanks to special tooth grinding geometry, pre-cutting and post-cutting teeth, the highest cutting performance is achieved and vibrations minimized.
Use:
- titanium
- stainless and acid-resistant steels
- nickel-alloys
- exotic and hardly workable alloys
- full material of medium or large(st) dimensions.
| Number of teeth per inch | ||||||
|---|---|---|---|---|---|---|
| [mm] | 0,75/1,25 | 1/1,5 | 1,4/2 | 2/3 | 3 | 3/4 |
| 27 x 0,9 | V | H | V | |||
| 34 x 1,1 | H | V | ||||
| 41 x 1,3 | V | V | V | |||
| 54 x 1,3 | V | V | ||||
| 54 x 1,6 | V | V | V | V | ||
| 67 x 1,6 | V | V | V | V | ||
H = hooked tooth shape, V = variable tooth
Maxtech 630 / variable and constant toothing
Characteristics:
aluminium 99.9% ● Al-bronze and Ampco.
| Number of teeth per inch | ||||||
|---|---|---|---|---|---|---|
| [mm] | 0,75/1,25 | 1/1,5 | 1,4/2 | 2/3 | 3 | 3/4 |
| 27 x 0,9 | V | H | V | |||
| 34 x 1,1 | V | V | ||||
| 41 x 1,3 | V | V | V | |||
| 54 x 1,3 | V | V | ||||
| 54 x 1,6 | V | V | V | V | ||
| 67 x 1,6 | V | V | V | V | ||
H = hooked tooth shape, V = variable tooth
Maxtech 650 / variable toothing
Characteristics:
special process of carbide welding, precisely ground tooth tips made of carbide ● special tooth grinding geometry, where a larger number of tooth cutting sections creates the cutting channel. Thus, the maximum cutting performance with almost no vibrations is achieved.
Use:
- full material of medium or large(st) dimensions
- stainless and acid-resistant steels
- heat-resistant steel
- high-alloy steel
- hammer steel
- nickel-alloys
- exotic and hardly workable alloys
- titanium
- steel up to tensile strength of approx. 1900 N/mm2
- Ampco
- zirconium.
| Number of teeth per inch | |||||
|---|---|---|---|---|---|
| [mm] | 0,75/1,25 | 1/1,5 | 1,4/2 | 2/3 | 3/4 |
| 27 x 0,9 | V | ||||
| 34 x 1,1 | V | V | |||
| 41 x 1,3 | V | V | V | ||
| 54 x 1,3 | V | V | |||
| 54 x 1,6 | V | V | V | V | |
| 67 x 1,6 | V | V | V | ||
| 80 x 1,6 | V | V | |||
V = variable tooth
Maxtech 651 / variable toothing
Characteristics:
induction hardened piston rod ● steel hardened up to 62 HRC ● steel with hard-chromium coating ● manganese steel.
| Number of teeth per inch | ||
|---|---|---|
| [mm] | 2/3 | 3/4 |
| 27 x 0,9 | V | |
| 34 x 1,1 | V | V |
| 41 x 1,3 | V | V |
| 54 x 1,6 | V | |
V = variable tooth
