Horizontal Boring Mill – Table Type
Features
• contouring horizontal boring machine
• fixed column, crosswise travelling table
• 4 linear axes, rotary table
• sliding workspindle
• machine designed for universal application in engineering production
• suitable for roughing as well as precision contouring
• optionally can be fitted with tool magazine with manipulator (ATC), tool cooling kit (CHZ), cooling through spindle axis (CHOV) or oil-mist cooling
• also can be fitted with non-sliding workspindle up to 5000 rpm or by motorspindle as specified by client
Optionally
ATC
• ATC facility is a separate unit
• magazine with servodrive for tool beds positioning
• changer driven electrically / pneumatically
CHZ
• tool cooling set with jets on headstock front side
• separate cooling unit – tank with pump, level gauge, pressure test
• tank volume approx. 150 l
• maximal pressure 4 bar / 32 l/min
• setup for tool cooling always included – distribution pipes, jets
CHOV
• once production has started is not possible to add into configuration
• separate cooling unit with filter and magnetic swarf separator required
• maximal pressure 40 bar – emulsion - tank volume 1000 l
• maximal pressure 80 bar – oil - tank volume 100 l
• both emulsion and oil may not be used for one particular machine
• other necessary alterations to machine and CE features depend on the required cooling pressure
• for pressure higher than 10 bar the cover of the workpiece or of the machine must be used
Oil-Mist Cooling
• can be added to machine at any time
• easy to assemble
• easy to use
Non-Sliding Spindle
• non-sliding spindle up to 5000 rpm
• distance of spindle face from headstock face c. 400 mm
• spinle drive with four hydraulically switched mechanical lines remains principally the same
Motorspindle
• spindle parameters as specified by client
